SAW WITH FIXED
BRIDGE - MOTORIZED FEED
TOOLS: diamond
blade for marble and granite, 250-300-350mm diameter, 25,4mm bore (not
included)
USEFUL CUT: 1000
- 1500 - 2000 - 2500 - 3000 - 3300 - 3500 mm
MOTOR: 3-phase 2
poles 400V 50Hz 2800rpm - Power 5KW (7HP)
WORKTABLE
Work table
fabricated in strong steel rails, finished with epoxy powder
Water recycling
system.
HEAD
- Bridge tilt for
cutting from 90° to 45°
- Motorized head
feed with variable speed from 0 to 7 m/min both
forward and
backward.
- Cutting depth
adjustment is motorized by motor reducer.
CONTROLS
Main isolator
switch
Emergency stop
push button
Reset luminous
"power-on" button
Main motor
start/stop button
Head forward,
stop and reverse button
Head forward and reverse
variable speed controls
Main motor raise
and lower buttons on the Z-axis
Emergency stop
push button (located on head)
BENCH SAW MODEL
AFR 100A-ZM
Useful cut: 1000
mm
Total length:
2460 mm
Weight (with
accessories): 332 Kg
BENCH SAW MODEL
AFR 150A-ZM
Useful cut: 1500
mm
Total length: 2960
mm
Weight (with
accessories): 375 Kg
BENCH SAW MODEL
AFR 200A-ZM
Useful cut: 2000
mm
Total length: 3460
mm
Weight (with
accessories): 418 Kg
BENCH SAW MODEL
AFR 250A-ZM
Useful cut: 2500
mm
Total length: 3960
mm
Weight (with
accessories): 461 Kg
BENCH SAW MODEL
AFR 300A-ZM
Useful cut: 3000
mm
Total length: 4460
mm
Weight (with
accessories): 507 Kg
BENCH SAW MODEL
AFR 330A-ZM
Useful cut: 3300
mm
Total length: 4760
mm
Weight (with
accessories): 537 Kg
BENCH SAW MODEL
AFR 350A-ZM
Useful cut: 3500
mm
Total length: 5060
mm
Weight (with
accessories): Kg
OPTIONAL
EXTRA CHARGE for
"HT" versioon
With blade guard
for disc Ø 400-500mm and 3phase motor 4 poles, 400V 50Hz - 1400rpm, 4kW (5,5HP)
GALVANIZED AND
PAINTED WATER TANK FOR AFR UP TO 1000mm
GALVANIZED AND
PAINTED WATER TANK FOR AFR 1300-2000mm
GALVANIZED AND
PAINTED WATER TANK FOR AFR 2500-3500mm
MOTOR: 3-phase
5.5KW (7.5HP) 2 poles - 50Hz=2800rpm 60Hz=3400rpm
MOTOR: 3-phase
5.5KW (7.5HP) 4 poles - 50Hz=1400rpm 60Hz=1700rpm
BLADE VARIABLE
SPEED FOR 5.5 KW (7.5 HP) MOTOR -700-3400rpm
LASER ALIGNMENT
DEVICE
To achieve an
effective cutting optimization, a laser diode mounted on the head shows the
blade's cutting line.
Laser beam in red
color
Power 20 mW
SIDE TABLE WITH 6
ROLLERS
Side extension
table equipped with rollers to facilitate slab movement.
Dimensions: 1000
x 458 mm
DEVICE FOR
PARALLEL CUTS FOR AFR
Machine can be
equipped with a special device that, controlling the movement of the side stop,
facilitates the execution of parallel cuts.
The side stop
runs parallel to the cutting line by means of a special hand wheel, so as to
avoid repeated
"trial and error" manual measurements.
Adjustment is
displayed by a digit position indicator.
Maximum
dimensions: 1780 x 1398 mm
Kivilõike seade Achilli AFR A-ZM
- Toote kood: ACHAFRAZM
- Saadavus: Tarneaeg 3-7 tööpäeva
-
0.00€
- Ilma käibemaksuta: 0.00€