SAWS WITH FIXED
BRIDGE - MOTORIZED FEED
MAX. DIAM. DISC
625 MM
X AXIS TRAVEL
3100 MM - Z AXIS TRAVEL 380 MM
Main motor:
3-phase 4 poles 400V 50-60Hz - Power: 7.5KW (10HP)
MACHINE STRUCTURE
Sturdy and
compact steel frame, sandblasted and ceramic coated.
E-chains to
protect and guide moving cables.
WORKTABLE
Work table
fabricated in galvanized steel rails
Dimensions of the
worktable: 3695 x 900 mm
Worktable
extensions 420x70mm
HEAD
Tilting head for
cutting from 90° to 45°
Motorized head
feed with variable speed from 0 to 7 m/min both
both forward and
reverse. Head travel: 3100 mm (reduced to 2900 mm when cutting at 45°)
Head runs on
angled rack and pinion
Cutting depth
adjustment is motorized by motor reducer.
CONTROLS - MAIN
ELECTRICAL PANEL:
Main isolator
switch
Power-on “RESET”
button
Main motor start/stop
button
Head forward,
stop and reverse button
Head forward and
reverse variable speed controls
Main motor raise
and lower buttons on the Z-axis
Raise and lower
buttons for pop up rollers (optional).
Emergency stop
push button
Laser switch
(optional).
TOOLS
Diamond disc for
marble and granite bore size Ø 50mm (not included) - 10 HP motor
Head at 90° :
max. Ø 625 mm (for different diameters we recommend OPT blade variable speed)
Cutting depth
(single cut) : 218 mm
Distance between
disc - work table (step cutting) : 185 mm
Headat45°:min.Ø500mm
MOTORS
Power supply:
400V 50-60Hz three phase (different voltages on special orders)
Main motor: three
phase 4 poles 7,5 kW = 10 HP - 1400rpm at 50Hz - 1700rpm at 60Hz. Feed motor,
0.37kw controlled by frequency inverter
Head raise and
lower motor, 0.18kw
Water recycling
pump (optional): 0.5kw motor
MEASUREMENTS AND
WEIGHT
Total length:
4276 mm
Total width
(without side table): 1200 mm
Total height:
2287 mm
Net weight
(without accessories): 792 Kg
Weight (with
optional pop up rollers): 988 Kg
Weight (with
rollers and accessories): 1221 Kg
OPTIONAL
2-SPEED MAIN
MOTOR
Low speed for
granite, power 5.5KW=7.5HP - 1400rpm at 50Hz
High speed for
marble, power 7.5KW=10HP - 2800rpm at 50Hz
Head at 90° :
max. Ø 625 mm (for different diameters we recommend OPT blade variable speed)
Cutting depth
(single cut) : 230 mm.
Distance between
disc - work table (step cutting) : 197 mm
(NOT COMPATIBLE
WITH BLADE VARIABLE SPEED
BLADE VARIABLE
SPEED FOR 7.5 KW (10 HP) MOTOR
The machine is
available with a frequency inverter for the main motor, allowing the operator
to set the correct peripheral speed of the diamond blade, from 800 to 2500 rpm,
according to the blade diameter and the hardness of the stone to be cut.
HYDRAULIC POP-UP
ROLLERS (MANUAL)
To facilitate
slab loading and positioning:
Roller table with
32 omni-directional rollers
Pop up rollers
raise and lower by hydraulic pump
NOT COMPATIBLE WITH OPTION: HYDRAULIC POP-UP
ROLLERS (MOTORIZED)
HYDRAULIC POP-UP
ROLLERS (MOTORIZED)
To facilitate
slab loading and positioning:
Roller table with
32 omni-directional rollers
Pop-up rollers
raise and lower by motorized hydraulic system
NOT COMPATIBLE WITH OPTION: HYDRAULIC POP-UP
ROLLERS (MANUAL)
WATER TANK &
BUILT-IN RECYCLING PUMP
Steel tank,
capacity 550 liters approx.
Water pump: 0.5Kw
motor - max capacity 250 l/min.
"PLC"
CONTROL UNIT FOR STEP-CUT PROGRAMMING
"PLC"
control unit (mounted on adjustable arm) to:
Program single
and step cutting
Raise and lower
pop up rollers (optional)
Program single
and step cutting with tilted head (90° to 45°)
Carry out cutting
in "manual" mode
Activate the
laser beam (optional).
EXTRA CHARGE FOR
LARGE-SIZE BRIDGE - X=3500mm
To extend X-axis
head travel from 3000 to 3500 mm
Bridge (section
140x140 mm) is mobile on steel guides.
Head runs on 16
adjustable bearings 62 mm in diameter
Blade raise and
lower by a threaded rod along 4 chromed steel columns.
MOTOR 11KW = 15HP
Head at 90° :
max. Ø 625 mm (for different diameters we recommend OPT blade variable speed)
Cutting depth
(single cut) : 205 mm
Distance between
disc - work table (step cutting) : 205 mm
NOT COMPATIBLE
WITH OPT26
BLADE VARIABLE
SPEED FOR 11KW (15HP) MOTOR
The machine is
available with a frequency inverter for the main motor, allowing the operator
to set the correct peripheral speed of the diamond blade, according to the
blade
diameter and the
hardness of the stone to be cut.
LASER ALIGNMENT
DEVICE
To achieve an
effective cutting optimization, a laser diode mounted on the head shows the
blade's cutting line.
Laser beam in red
color
Power 20 mW
SIDE EXTENSION
TABLE (without rollers)
For large slabs,
machine can be equipped with a side extension table
Dimensions:
1510x865 mm.
SIDE EXTENSION
TABLE (with rollers)
Side extension
table equipped with rollers to facilitate slab movement.
Dimensions: 1510
x 865 mm.
DEVICE FOR
PARALLEL CUTS
Machine can be
equipped with a special device that, controlling the movement of the side stop,
facilitates the execution of parallel cuts.
The side stop
runs parallel to the cutting line by means of a special hand wheel, so as to
avoid repeated
"trial and error" manual measurements.
Adjustment is
displayed by a digit position indicator.
Maximum
dimensions: 1780 x 1398 mm
Minimum
dimensions: 1133 x 1398 mm
MOBILE ARM
CONTROL PANEL
For better
monitoring and control during cutting, control panel is mounted on an adjustable
arm that follows the head along the cutting line. Includes the following
controls:
Main motor
start/stop button
Head forward,
stop and reverse button
Head forward and
reverse variable speed controls
Main motor raise
and lower button.
Emergency stop
push button
Raise and lower
button for motorized pop up rollers (optional)
FRAME WITH
HOT-DIP GALVANIZING TREATMENT (NOT PAINTED)
Kivilõike seade Achilli TFM
- Toote kood: ACHTFM
- Saadavus: Tarneaeg kuni 14 tööpäeva
-
0.00€
- Ilma käibemaksuta: 0.00€