SAWS WITH FIXED BRIDGE - MANUAL FEED

TOOLS: diamond blade for marble and granite, 250-300-350mm diameter, 25,4mm bore (not included)

USEFUL CUT: 1500 - 2000 - 2500 - 3000 - 3300 - 3500 mm

MOTOR: 3-phase 2 poles 400V 50Hz 2800rpm - Power 3KW (4HP)

WORKTABLE

Work table fabricated in strong steel rails, finished with epoxy powder

Water recycling system.

HEAD

Bridge tilt for cutting from 90° to 45°

Manual head feed by hand crank

Manual cutting depth adjustment by hand crank

BENCH SAW MODEL AFR 150C

Useful cut: 1500 mm

Total length: 2250 mm

Weight (with accessories): 260 Kg

BENCH SAW MODEL AFR 200C

Useful cut: 2000 mm

Total length: 2750 mm

Weight (with accessories): 282 Kg

BENCH SAW MODEL AFR 250C

Useful cut: 2500 mm

Total length: 3250 mm

Weight (with accessories): 304 Kg

BENCH SAW MODEL AFR 300C

Useful cut: 3000 mm

Total length: 3735 mm

Weight (with accessories): 332 Kg

BENCH SAW MODEL AFR 330C

Useful cut: 3300 mm

Total length: 4035 mm

Weight (with accessories):  Kg

OPTIONAL

GALVANIZED AND PAINTED WATER TANK FOR AFR 1300-2000mm

GALVANIZED AND PAINTED WATER TANK FOR AFR 2500-3500mm

MOTOR: 1-phase 2.2KW 2 poles 230V 50Hz 2800rpm instead of 3-phase 3KW

MOTOR: 1-phase 2.2KW 4 poles 230V 50Hz 1400rpm instead of 3-phase 3.6KW

FOR MODS AFR-C HT ONLY

LASER ALIGNMENT DEVICE

To achieve an effective cutting optimization, a laser diode mounted on the head shows the blade's cutting line.

Laser beam in red color

Power 20 mW

SIDE TABLE WITH 6 ROLLERS

DEVICE FOR PARALLEL CUTS FOR AFR

Machine can be equipped with a special device that, controlling the movement of the side stop, facilitates the execution of parallel cuts.

The side stop runs parallel to the cutting line by means of a special hand wheel, so as to

avoid repeated "trial and error" manual measurements.

Adjustment is displayed by a digit position indicator.

Maximum dimensions: 1780 x 1398 mm

Minimum dimensions: 1133 x 1398 mm