SAWS WITH FIXED
BRIDGE - MOTORIZED FEED
TOOLS: diamond
blade for marble and granite, 250-300-350mm diameter, 25,4mm bore (not
included)
USEFUL CUT: 3300
mm
MOTOR: 3-phase 2
poles 400V 50Hz 2800rpm - Power 5KW (7HP)
MOTOR: 3-phase 2
poles 230V 60Hz 3400rpm - Power 5KW (7HP)
MACHINE STRUCTURE
Sturdy and
compact steel frame, sandblasted and ceramic coated.
E-chains to
protect and guide moving cables.
WORKTABLE - BASIC
VERSION
Work table
fabricated in galvanized steel rails
Dimensions of the
worktable: 3695 x 900 mm
Worktable
extensions 420x70mm
HEAD
Tilting head for
cutting from 90° to 45°
Motorized head
feed with variable speed from 0 to 7 m/min both
both forward and
reverse.
Cutting depth
adjustment is motorized by motor reducer.
CONTROLS - MAIN
ELECTRICAL PANEL:
Main isolator
switch
Power-on “RESET”
button
Main motor
start/stop button
Head forward,
stop and reverse button
Head forward and
reverse variable speed controls
Main motor raise
and lower buttons on the Z-axis
Raise and lower
buttons for pop up rollers (optional).
Emergency stop
push button
Laser switch
(optional).
MEASUREMENTS AND
WEIGHT
Total length:
4530 mm
Total width: 1040
mm
Total height:
1740 mm (1820mm HT vers)
Net weight
(without accessories): 715 kg
OPTIONAL
EXTRA CHARGE for
"HT" versioon
With blade guard
for disc Ø 400-500mm and 3phase motor 4 poles, 400V 50Hz - 1400rpm, 4kW (5,5HP)
With blade guard
for disc Ø 400-500mm and 3phase motor 4 poles, 230V 60Hz - 1700rpm, 4kW (5,5HP)
MOTOR: 3-phase
5.5KW (7.5HP) 2 poles - 50Hz=2800rpm 60Hz=3400rpm
HYDRAULIC POP-UP
ROLLERS (MANUAL)
To facilitate
slab loading and positioning:
Roller table with
32 omni-directional rollers
Pop up rollers
raise and lower by hydraulic pump
WATER TANK &
BUILT-IN RECYCLING PUMP
For a flexible
and easy machine operation:
Steel tank,
capacity 550 liters approx.
Water pump: 0.5Kw
motor - max capacity 250 l/min.
LASER ALIGNMENT
DEVICE
To achieve an
effective cutting optimization, a laser diode mounted on the head shows the
blade's cutting line.
Laser beam in red
color
Power 20 mW
SIDE EXTENSION
TABLE (without rollers)
For large slabs,
machine can be equipped with a side extension table
Dimensions:
1510x865 mm.
SIDE EXTENSION
TABLE (with rollers)
Side extension
table equipped with rollers to facilitate slab movement.
Dimensions: 1510
x 865 mm.
DEVICE FOR
PARALLEL CUTS
Machine can be
equipped with a special device that, controlling the movement of the side stop,
facilitates the execution of parallel cuts.
The side stop
runs parallel to the cutting line by means of a special hand wheel, so as to
avoid repeated
"trial and error" manual measurements.
Adjustment is
displayed by a digit position indicator.
Maximum
dimensions: 1780 x 1398 mm
Minimum
dimensions: 1133 x 1398 mm
Kivilõike seade Achilli TFR-A
- Toote kood: ACHTFRA
- Saadavus: Tarneaeg 3-7 tööpäeva
-
0.00€
- Ilma käibemaksuta: 0.00€