SAW FOR 45 DEGREE
CUTS (+/-1°)
DISC DIAM. 350
-400-450MM
X AXIS TRAVEL
3300 MM
WORKABLE
THICKNESS 10-80 MM
Main motor:
3-phase 4 poles 400V 50-60Hz - Power: 5.5KW (7.5HP)
Main motor:
3-phase 4 poles 230V 60Hz - Power 5.5 kW (7.5HP)
Sturdy and
compact steel frame with hot-dip galvanizing treatment
Beam bellows
protection on X axis
No. 10 pneumatic
pistons secure the workpiece in place during machining. E-chains to protect and
guide moving cables.
WORKTABLE
Work table made
of polizene strips.
Dimensions of the
worktable: 3300 x 1000 mm
HEAD MOTION
High precicion
head motion on linear guides with recirculating ball slides.
X axis runs on
rack and pinion.
Motorized head
feed with variable speed in cutting direction and return at max speed.
CONTROLS - MAIN
ELECTRICAL PANEL:
Main isolator
switch
Power-on “RESET”
button
Emergency stop
push button
TOOLS
Diamond blade Ø
350-400-450mm, 50mm bore. (not included)
MOTORS
Power supply:
400V 50-60Hz three phase (different voltages on special orders)
Main motor : 4
poles 5.5KW=7.5HP - 1400rpm @ 50Hz - 1700rpm @ 60Hz
MEASUREMENTS AND
WEIGHT
Dimensions (width
x length x height): 4350 x 1500 x 1480 mm
Net weight
(without accessories): 925 Kg
OPTIONAL
BLADE VARIABLE
SPEED FOR 5.5 KW (7.5 HP) MOTOR - 700/3400rpm
The machine is
available with a frequency inverter for the main motor, allowing the operator
to set the correct peripheral speed of the diamond blade, according to the
blade
diameter and the
hardness of the stone to be cut.
HYDRAULIC POP-UP
ROLLERS (MANUAL)
To facilitate
slab loading and positioning:
Roller table with
32 omni-directional rollers
Pop up rollers
raise and lower by hydraulic pump
WATER TANK &
BUILT-IN RECYCLING PUMP
Steel tank,
capacity 550 liters approx.
Water pump: 0.5Kw
motor - max capacity 250 l/min.
SIDE EXTENSION
TABLE (with rollers)
Side extension
table equipped with rollers to facilitate slab movement.
Dimensions: 1510 x 865 mm.
Kivilõike seade Achilli MSA
- Toote kood: ACHMSA
- Saadavus: Tarneaeg kuni 14 tööpäeva
-
0.00€
- Ilma käibemaksuta: 0.00€